MCX-610 Ασύρματος αναμεταδότης για συναγερμούς VISONIC

Συναγερμοί

Συστήματα ασφαλείας

Συστήματα συναγερμού

MCX-610 Ασύρματος αναμεταδότης για αισθητήρες και συναγερμούς VISONIC
Κατασκευαστής: VISONIC 
Ασύρματος αναμεταδότης για αισθητήρες και συναγερμούς PowerMax® της VISONIC

ΙΔΙΟΤΗΤΕΣ MCX-610
• Supports 1way and 2way∗ keyfob and detector devices
• Mains powered
• 36 hours backup battery (rechargeable)
• Front and back tamper protected
• Enrolment and test buttons
• Diagnostic of installation performance
• AC power fail indication (green LED)
• Activity (RF) indication (blue LED)
• Compatible with PowerMaxExpress PowerMaxComplete
PowerMaxPro, PowerMax+ and PowerMax1 versions
• Indoor environment

ΤΕΧΝΙΚΑ ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ

• Frequency Band (MHz):Europe:  433.92
• Antenna: Diversity antenna
• Enrolled devices: Up to 50 devices may be enrolled to the repeater.
• Communication Protocol: PowerCode
• AC Power Supply: AC to AC adaptor.230 VAC, 50 Hz / 9 VAC, 0.35 A min.
• Backup Battery: 4.8-Volt 1300 mAh NiMH rechargeable.
• Current drain at 5.7 VDC: 90 mA
• Battery Backup Duration (with fully charged 1300 mA/h battery) 36 hours:
• LED indicator: Green LED lights when AC power on. Blue LED lights during transmission.
• Supervision: A periodic supervision message is transmitted automatically once every 15 minutes at 433.92

userfiles/file/MCX_610_Data_Sheet_English.pdf

userfiles/file/MCX_610_Installer_Guide_English_Spanish_D302722.pdf

ΕΓΓΥΗΣΗ 1 ΕΤΟΣ

Repeater MCX-610Advanced PowerCode Wireless Repeater
MCX-610 extends the communication range between the PowerMax® systems and other PowerCode™ transmitter, including one-way and two-way keyfobs*, remote commander and PowerCode motion detectors. It receives alarm, status and control messages from the wireless devices, and sends these messages to the control panel.

For maximum security, the MCX-610 repeater uses a unique, factory programmed, randomly selected 24-bit digital alarm ID code during each transmission. This code is selected from 16 million possible code combinations and is therefore unique and virtually impossible to accidentally reproduce.

Other important benefits of the MCX-610 include the unique anti-collision transmission sequence, which ensures accurate reception of simultaneous signals from multiple transmitters. The fully supervised repeater issues a test report on an hourly basis, indicating faults such as power failure, low battery charge and tampering.

Features & Benefits:
Supports both one-way and two-way keyfobs*, remote commander and all wireless PowerCode detectors Compact and easy to install Mains powered, with rechargeable 36-hour backup battery Front and back tamper protected LED indications for power failure, activity and installation performance diagnostics Up to 50 different devices can be enrolled to the repeater Complies with EN and FCC standards