HX-1CH Σετ τηλεχειρισμού (Δέκτης & τηλεχειριστήριο)1 εντολής

Τηλεχειρισμοί συναγερμών

HX-1CH Σετ τηλεχειρισμού (Δέκτης & τηλεχειριστήριο) 1 εντολής
Κατασκευαστής:HOMELUX

Τεχνικά Χαρακτηριστικά: 
- Τάση λειτουργίας: DC12V 
- Συχνότητα λειτουργίας: 433 MHz
- Απόκλιση συχνότητας: ± 0.2MHz 
- Θερμοκρασία λειτουργίας: -40 ~ 80
- Receiving sensitivity- ευαισθησία λήψης: ≥-105dBm
- Modulation: AM Διαμόρφωση
- Διαστάσεις:55x25x75 mm

Ο τηλεχειρισμός μπορεί να λειτουργήσει με 3 τρόπους:

α.  Σε κάθε εντολή του πομπού (τηλεχειριστηρίου) η επαφή του δέκτη (ρελέ) ενεργοποιείται στιγμιαία,κλείνει ή ανοίγει στιγμιαία και επανέρχεται άμεσα (στιγμιαίο κλείσιμο ή άνοιγμα της επαφής του ρελέ).
β. Σε κάθε εντολή του πομπού (τηλεχειριστηρίου) η επαφή του δέκτη (ρελέ) κλείνει ή ανοίγει μόνιμα (κλείσιμο ή άνοιγμα της επαφής του ρελέ με κάθε εντολή του τηλεχειριστηρίου). 
γ. Με την εντολή του τηλεχειριστηρίου το ρελέ ''μανταλώνει'' και επανέρχεται με διακοπή της τροφοδοσίας.

►ΟΔΗΓΙΕΣ ΧΡΗΣΗΣ ΣΤΑ ΕΛΛΗΝΙΚΑ userfiles/file/HX-1CH.pdf

ΕΓΓΥΗΣΗ 1 ΕΤΟΣ

Detailed Product Description HX-1CH
1.Remote switch
2.Remote switch controller
3.Wireless remote switch
4.Output: on and off signal

Features HX-1CH:

High confidentiality, large storage , stable performance and dispensing with traditional jumpers or switches coding, just wireless remote control will be fired the receiving signal controller, make this controller receive and store the signal from remote control .

Tech Spec HX-1CH:

Operating voltage: DC12V

Operating frequency: 433 MHz

Frequency deviation: ± 0.2MHz

Operating temperature: -40 ~ +80

Receiving sensitivity: ≥-105dBm

Modulation: AM

Encode with remote : can learning with fixed code and learning code remote

Signal output method : L4(Latch)-signal interlocking, M4(Momentary)-signal temporary , T4(Toggle)-signal self-locking or more complex control procedures

Application:

Mainly used in electric doors, windows, lifting equipment, gateways, industrial control, security and protection field(wired to wireless switching system) ,it can support remote control , which can composite a set of wireless intelligent remote control components .

1. Summary

This wireless rceiving contrller, high confidentiality, large memory, stable performance, low power consumption, convenient using, without using traditinal jumpers or switches coding, just make the receiving controller receive and save the signals from wireless remote control, then they can be realized to use together. If the learned control is lost in using process, just clear the information stored in the receiving controller, the lost of remote control cannot control the receiving controller, must learn once aganin before using. There are three states of output: (self-locking, nn-locking, interlocking coexist), choosing different working conditions, decided by learning different remote keys.

2. Learning Method

Pressing the learning button on receiving controller board, after emitting a buzzer Bi, innediately putting the learning button on the remote control, after receiving controller receiving signal from remote control, a buzzer Bi inficates successful learning.( You need clear all mode before, then yu can motify new working mode now).

For exmaple:

A. Signal non-locking Pressing on the learning key "3" on the remote control to learn, then 12 ways both non-locking

Namely: Pressing key 1 on the control, Relay K1 sucking, loosing key 1, and relay K1 disconnected, press key 2, Relay K2 sucking, loosing key2, relay K2 disconnected.

B. Signal interlocking, Pressing on the learning key"6" on the remote control to learn, then 12 ways both interlocking

Namely: Pressing button 1 on the remote control, corresponding to relay K1 sucking and keeping, other 11 ways discommected; Pressing button 2, other 11 ways disconnected, relay K2 sucking and keeping, the work in circulation.

C. signal self-locking -- Pressing on the learning key "9" on the remote control to learn, 12 ways both self-locking

Namely: pressing button 1 on the remote control, corresponding to relay K1 sucking, then press button 1 again, relay K1 disconnected, this working mode is nothing with other keys.


3. Clear the existing finformation

Pressing the learning key on the receiving controller for 10s, then a buzzer Bi indicates that exising information is cleared successfully.

4. Main Tech Data:

1. Operating Voltage: DC12V

2. Quiescent current:<6mA

3. Operating temp: -40 degree to 80 degree

4. Receiving sensibility: >105dbm

5. Operation frequency: 315/433MHz


5. The wiring terminal and working mode diagram

From top to bottom is respectively: Positive power, Negitive power, NC, COM, NO, NC, COM, NO